Back to top
Skip to content
Skip to menu
Back to top
Back to main
Skip to menu
So it can be spotted in server logs and on rcon status condumps.
hey, its got a bad vid mode in a config somewhere, do this: 'sacc-urt.i386 +set r_mode 4'
Thats what I've detected to
IIRC r_mode 4 means 800x600 - great Resolution for my 22" TFT
What I've not have attached was that the Game tries Standard VGA Resolution (640*480) by itsself after the custom Resolution fails to Start.
This is what I use atm (with the native UrT Client):
seta r_fullscreen "0"
seta r_customwidth "1673"
seta r_customheight "1000"
seta r_mode "-1"
Its in Windowed Mode because of my Dualmonitor Setup, but I works in Fullscreen neither.
--
ItsMe
_________________
I just ment run it that way one time to get in so you could set proper res.
about ikal n such, I'm not interested in supporting sound hacks. Sorry. -- The source is always available if you wish to patch it yourself.
@itsme, it appears you know what to do, why did you ask me? Why are you wasting my time with such BS posts if you already know the settings you need to set? Try using your brain before posting
Thats the answer of a real Developer - WOW! N1 - What a bug? Go ahaed and don't waste my Time. ROFL
I just USED my Brain and tried other modes by myself and it does NOT work that was my Question.
PS.
You say: I do not change anything to the Vanilla Source and just added a few cvars, so why is your binary not be able to run 640x480, 800x600 or whatever when othe rbinarys can? - Oh let my alone with this ?%&$§.
_________________
The vid modes run just fine. Its your config somewhere. I don't know what you did or did not do wrong, but the client works EXACTLY the same as far as rendering and game play is concerned.
@all: A mitsu build is on the way, I've just been a little busy.
PS to itsme: I have 4 active projects and I have to manage PUGBOT. I barely have time to do this stuff. That IS NOT A BUG. you are doing something incorrectly, I do not have time to personally help every person who is having an issue. I do what I can, but I expect you guys to try and figure this out on your own to an extent. Also, what language do you speak? is there anyone who speaks your language who can help you? I can barely understand what you mean, it would help a lot if I knew what you were saying.
Last edited by slackin on Thu Jun 09, 2011 11:30 pm; edited 1 time in total
that's impossible. lol
if 1920x1080 is your native resolution you cant use 1600x1200. 1080 is less than 1200.
SACC - Slackin's Advanced Competitive Client
Go to page 1, 2 NextSACC - Slackin's Advanced Competitive Client
Posted: Wed Jun 01, 2011 11:14 am
Here it is! forums.pugbot.com/inde...topic=66.0
-
slackin - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Wed Jun 01, 2011 2:52 pm
Might be interesting, especially with the urban zone summer cup coming up.
I do have some questions though, does this give a competive advantage, and does it work vs non-migrated players?
Can we check if someone has this client?
_________________
I do have some questions though, does this give a competive advantage, and does it work vs non-migrated players?
Can we check if someone has this client?
_________________
-
SevenofNine - Admin
Re: SACC - Slackin's Advanced Competitive Client
Posted: Wed Jun 01, 2011 3:23 pm
all sacc clients report rate of 3000
So it can be spotted in server logs and on rcon status condumps.
-
Nexu - Admin
Re: SACC - Slackin's Advanced Competitive Client
Posted: Wed Jun 01, 2011 4:09 pm
actually does not now. Any league admin interested, lets talk. There are other ways to tell.
-
slackin - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Sun Jun 05, 2011 7:52 pm
Hi,
I'm on an Linuxsystem and tried it out but get the following:
SDL_Init(SDL_INIT_VIDEO) passed.
Initializing OpenGL display
...setting mode -1: 1680 1050
SDL_SetVideoMode failed: Couldn't find matching GLX visual
SDL_SetVideoMode failed: Couldn't find matching GLX visual
--
ItsMe
_________________
I'm on an Linuxsystem and tried it out but get the following:
SDL_Init(SDL_INIT_VIDEO) passed.
Initializing OpenGL display
...setting mode -1: 1680 1050
SDL_SetVideoMode failed: Couldn't find matching GLX visual
SDL_SetVideoMode failed: Couldn't find matching GLX visual
--
ItsMe
_________________
-
ItsMe - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Mon Jun 06, 2011 12:54 am
- ItsMeHi,
I'm on an Linuxsystem and tried it out but get the following:
SDL_Init(SDL_INIT_VIDEO) passed.
Initializing OpenGL display
...setting mode -1: 1680 1050
SDL_SetVideoMode failed: Couldn't find matching GLX visual
SDL_SetVideoMode failed: Couldn't find matching GLX visual
--
ItsMe
hey, its got a bad vid mode in a config somewhere, do this: 'sacc-urt.i386 +set r_mode 4'
-
slackin - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Mon Jun 06, 2011 8:56 am
- slackin
hey, its got a bad vid mode in a config somewhere, do this: 'sacc-urt.i386 +set r_mode 4'
Thats what I've detected to
IIRC r_mode 4 means 800x600 - great Resolution for my 22" TFT
What I've not have attached was that the Game tries Standard VGA Resolution (640*480) by itsself after the custom Resolution fails to Start.
This is what I use atm (with the native UrT Client):
seta r_fullscreen "0"
seta r_customwidth "1673"
seta r_customheight "1000"
seta r_mode "-1"
Its in Windowed Mode because of my Dualmonitor Setup, but I works in Fullscreen neither.
--
ItsMe
_________________
-
ItsMe - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Mon Jun 06, 2011 5:31 pm
Can you put Ikalizer on it? I use Ikalizer and I would change to this if this build had Ikalizer.
-
flajeen - Wannabe
Re: SACC - Slackin's Advanced Competitive Client
Posted: Mon Jun 06, 2011 9:14 pm
- ItsMe- slackin
hey, its got a bad vid mode in a config somewhere, do this: 'sacc-urt.i386 +set r_mode 4'
Thats what I've detected to
IIRC r_mode 4 means 800x600 - great Resolution for my 22" TFT
What I've not have attached was that the Game tries Standard VGA Resolution (640*480) by itsself after the custom Resolution fails to Start.
This is what I use atm (with the native UrT Client):
seta r_fullscreen "0"
seta r_customwidth "1673"
seta r_customheight "1000"
seta r_mode "-1"
Its in Windowed Mode because of my Dualmonitor Setup, but I works in Fullscreen neither.
--
ItsMe
I just ment run it that way one time to get in so you could set proper res.
about ikal n such, I'm not interested in supporting sound hacks. Sorry. -- The source is always available if you wish to patch it yourself.
@itsme, it appears you know what to do, why did you ask me? Why are you wasting my time with such BS posts if you already know the settings you need to set? Try using your brain before posting
-
slackin - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Tue Jun 07, 2011 12:15 am
@ slackin: is there some improvement possible? 'cause i've got a 24'' screen, and with the related custom resolution (1920x1080), i got 30-40 fps. When i set 1600x1200, i've got 125 fps with no drop, but game looks like shit. Is there any way to fix this?
anyway, congratz for your job so far.
anyway, congratz for your job so far.
-
Kagohan - World Champion
Re: SACC - Slackin's Advanced Competitive Client
Posted: Tue Jun 07, 2011 11:11 am
@itsme, it appears you know what to do, why did you ask me? Why are you wasting my time with such BS posts if you already know the settings you need to set? Try using your brain before posting
Thats the answer of a real Developer - WOW! N1 - What a bug? Go ahaed and don't waste my Time. ROFL
I just USED my Brain and tried other modes by myself and it does NOT work that was my Question.
PS.
You say: I do not change anything to the Vanilla Source and just added a few cvars, so why is your binary not be able to run 640x480, 800x600 or whatever when othe rbinarys can? - Oh let my alone with this ?%&$§.
_________________
-
ItsMe - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Tue Jun 07, 2011 11:54 am
@all Keep it constructive and not a trolling contest.
-
SevenofNine - Admin
Re: SACC - Slackin's Advanced Competitive Client
Posted: Thu Jun 09, 2011 12:31 am
Definitely nice stuff, it is somehow feelin better to me. Nice work dude. Im hoping also to see some of the stuff of mitsubishis client combined with this since im too dumb for that. One question though: is this now allowed or not? I mean i could use it since its not based on serverside if i understood that right.
-
IkxiE - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Thu Jun 09, 2011 11:27 pm
- ItsMe
@itsme, it appears you know what to do, why did you ask me? Why are you wasting my time with such BS posts if you already know the settings you need to set? Try using your brain before posting
Thats the answer of a real Developer - WOW! N1 - What a bug? Go ahaed and don't waste my Time. ROFL
I just USED my Brain and tried other modes by myself and it does NOT work that was my Question.
PS.
You say: I do not change anything to the Vanilla Source and just added a few cvars, so why is your binary not be able to run 640x480, 800x600 or whatever when othe rbinarys can? - Oh let my alone with this ?%&$§.
The vid modes run just fine. Its your config somewhere. I don't know what you did or did not do wrong, but the client works EXACTLY the same as far as rendering and game play is concerned.
@all: A mitsu build is on the way, I've just been a little busy.
PS to itsme: I have 4 active projects and I have to manage PUGBOT. I barely have time to do this stuff. That IS NOT A BUG. you are doing something incorrectly, I do not have time to personally help every person who is having an issue. I do what I can, but I expect you guys to try and figure this out on your own to an extent. Also, what language do you speak? is there anyone who speaks your language who can help you? I can barely understand what you mean, it would help a lot if I knew what you were saying.
Last edited by slackin on Thu Jun 09, 2011 11:30 pm; edited 1 time in total
-
slackin - Newbie
Re: SACC - Slackin's Advanced Competitive Client
Posted: Thu Jun 09, 2011 11:30 pm
- Kagohan@ slackin: is there some improvement possible? 'cause i've got a 24'' screen, and with the related custom resolution (1920x1080), i got 30-40 fps. When i set 1600x1200, i've got 125 fps with no drop, but game looks like shit. Is there any way to fix this?
anyway, congratz for your job so far.
that's impossible. lol
if 1920x1080 is your native resolution you cant use 1600x1200. 1080 is less than 1200.
-
flajeen - Wannabe
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum